Why is the TI harness on the LT-1 wrapped with a friction-tape type wrap rather than the standard plastic type wrap? Is that typical TI wrap? If so, any idea why? Clupper can probably weigh in on this one. Thanks
71LT-1 wiring harness wrap
Collapse
X
-
Re: 71LT-1 wiring harness wrap
Midyear T.I. cars used the same friction tape-type wrap on the T.I. harness.- Top
Comment
-
Re: 71LT-1 wiring harness wrap
As I recall it was due to the heat generated by a rather long resistance wire in the harness. (Disclaimer I was not directly involved in the harness design)Bill Clupper #618- Top
Comment
-
Re: 71LT-1 wiring harness wrap
I see that the non-stick wrap is availible from several vendors but don't see the friction tape listed. Is "Monkey grip" or any easily found friction tape suitable? Also, is there anyone that knows if the non-stick tape is availible locally or is it unique to automotive wiring harness's? Thanks!!- Top
Comment
-
Re: 71LT-1 wiring harness wrap
The friction tape is very similar to garden-variety hardware store variety. The vinyl tape was made in-house at Packard Electric in different thicknesses and widths depending on a variety of requirements drivers, including the planned wiring harness assembly process..Bill Clupper #618- Top
Comment
-
-
- Top
Comment
-
- Top
Comment
Comment