Searching for Corvette Door Push-button Bezel, 1968

[Kenneth A.]

Anybody out there with knowledge of where to find this bezel. Ecklers shows it temporarily suspended. Other searches of my normal spots say the same thing. I did not realize one part would be so difficult.

Thanks

[Michael D.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Based on what I've seen on some of the various Parts Wanted forums, the 68 bezels have all but disappeared. Good luck with the hunt.

[Reba W.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Zip Corvette website says it will be available Feb. 24. Many many parts for 1968 are difficult to find if they are for that year only, and there were many changes during production.

[Joseph H.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Try this guy in San Diego area. I have purchased many parts from him, he may just have what you need.

http://www.socalvettes.com/

Joe

[Joseph M.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Try Corvette USA in California. Mike has a lot of vintage parts. Tele no# 1-888-318-3883.

[Kenneth A.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Thanks for all of the help. I found one- actually person had two so I went ahead and bought two

[Joe L.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Thanks for all of the help. I found one- actually person had two so I went ahead and bought two

Ken------


Were they new or good used pieces?

[Kenneth A.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Joe

They were new pieces purchased several years ago - for now that is what I am going with since it is a driving project. Would be glad to share a contact or two I received if anybody else is interested. Now I am on to steering shaft parts. Mine are all cracked

[Joe L.]

Re: Searching for Corvette Door Push-button Bezel, 1968

Joe

They were new pieces purchased several years ago - for now that is what I am going with since it is a driving project. Would be glad to share a contact or two I received if anybody else is interested. Now I am on to steering shaft parts. Mine are all cracked

Kenneth------


The part was discontinued by GM in July, 1996.