94 headlight rebuild

[Keith B.]

on my 94 daily driver after I turn off my headlights the doors go down fine but I can still hear the motor trying to move. I was told its the bushings going bad inside the motor. I would like to rebuild them. I see in Corvette Centrals catalog they list three different bushings

1.http://www.parts123.com/parts123/yb....Z5Z5Z50000050F

2.

http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000050f~Z5Z5Z519792~P27.95~~~~S3D41CCRID98235612450d~Z5Z5Z5~Z5Z5Z50000050F

3.

http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000050f~Z5Z5Z510436~P5.95~~~~S3D41CCRID98235612450d~Z5Z5Z5~Z5Z5Z50000050F

So what one(s) do I need.

[Tom H.]

Re: 94 headlight rebuild

Keith, this is the one I would say you need. That's what we typically see.

http://www.parts123.com/parts123/yb....Z5Z5Z50000050F

[Keith B.]

Re: 94 headlight rebuild

Ok thanks. I don't understand how these will solve my problem. the motors work fine. but after the left one closes I can here it run. but I will order these and see what happens

[John G.]

Re: 94 headlight rebuild

Keith, you can trust Tom. I rebuilt my '93's motors with this kit. The "Delrin bushing" basically aligns the headlight gears. After time they just turn to powder as you will see when you open the housing. I suggest replacing in both headlights at same time.....it's a lot easier with the hood off. Good luck.
John G.

[Keith B.]

Re: 94 headlight rebuild

since only the drivers side is giving me troubles I ordered a new gear and bushings for that and only bushings for the other side. it looks easy enough to repair

[Bill H.]

Re: 94 headlight rebuild

http://www.corvettemagazine.com/body/c4-corvette-headlight-bushing-replacement-1988-1996.html