Need help with 62 bolts

[Richard T.]

I've been searching for original hood support bolts for my 62 without any luck so I'm hoping that a member can help me find them. They're dished hex head with an integral washer and a "U" inside of concentric circles. If anyone can steer me to a source I'd greatly appreciate it or if you have one or two you would sell please let me know. pictures attached. Rich jcmsp062@aol.com

[Lou C.]

Re: Need help with 62 bolts

Rich, Have seen these U bolts on a number of original mid - late production 62 cars.

[Rich P.]

Re: Need help with 62 bolts

here is anoter style I have seen.

It's the ones on the left. I have seen them used up to 64 speraticaly.

Rich

[Timothy B.]

Re: Need help with 62 bolts

Are the support bolts to hood 5/8" or 3/4" long?

[Mike E.]

Re: Need help with 62 bolts

I've never seen one of those variations on an original 62--I've seen about 4 different types on unmolested 62's over the years--like Lou's, like Rich Thomas', like Rich Thomas' without the concentric circles, but dished hex head, and several others which I need to dig out of my bolts bins.

here is anoter style I have seen.

It's the ones on the left. I have seen them used up to 64 speraticaly.

Rich