PCV hose - correct for 1966 - NCRS Discussion Boards

PCV hose - correct for 1966

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Larry T.
    Expired
    • May 15, 2007
    • 404

    PCV hose - correct for 1966

    What should a correct PCV hose for a 1966 L-72 car look like?
  • Joe L.
    Beyond Control Poster
    • January 31, 1988
    • 43160

    #2
    Re: PCV hose - correct for 1966

    Originally posted by Larry Tape (47364)
    What should a correct PCV hose for a 1966 L-72 car look like?
    Larry-----


    I'm not sure exactly how the original hose appeared in every nuance of detail. I'm not even sure that the original hoses were exactly the same for all cars. However, for all practical purposes, it's moot. The original hoses under the original part numbers were never available in SERVICE from GM. So, no NOS examples could exist. Beyond that, I doubt that any original hose installed on a car would be in serviceable shape by now.

    I think you'll find that the PCV hoses available from Dr. Rebuild will be about as close to original as you're going to get.
    In Appreciation of John Hinckley

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"