Correct bottom design for original '66 40083 fuel pump

[Alan D.]

Re: Correct bottom design for original '66 40083 fuel pump

At the 07 National the judge did not "rebuilt" but no point loss. He made that determination from the top.
I did have non S screws, the newer rod pin, & no yellow lines on lower rubber gasket on that 67 pump. So yes, don't be concerned about those screws.

[Gary B.]

Judging notation

Alan,

It would have been nice if the judge who noted "rebuilt" had also included an word or two about how he/she knew it was rebuilt. There's little value to the owner of a cryptic notation like "rebuilt".

Gary