If this is your first visit, be sure to check out the FAQ You must be an NCRS member before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below. If you have trouble logging in you can clear your cookies here!
What color is the hinge brackets and springs in a 69 convertible deck?
Where does the body color stop?
Attached is area of question.
Thanks in advance.
It's not the best at showing your point of inquiry, but as you can see both the brackets and the springs are poor quality body color, and I would assume your 69 should be similar. I was never told mine was incorrect in judging. Good Luck
The deck lid was mounted to its hinge bracket with springs in place when the body whent through the paint booth. Since the underside of the deck lid was shot with body color, the supporting hinge assy's also received spray.
Where does the color stop? That's a variable. It depended on the aggressiveness of the painter and the amount of airborne overspray present on that particular paint job. Most show SOME sign of radom overspray all the way to the bottom of the hinge support assy with coverage thinning out the further away from the bottom side of the deck lid you go down the hinge assy...
Comment