Body Dolly Problems on C-1 Body

[Troy P.]

Re: Body Dolly Problems on C-1 Body

I did notice it had a angle iron nose support. Seems to me it should have a rear body support too though. I suspect someone has a design for an all wood dolly that supports both ends and is integrated (without add on front and rear supports).

[Brooks G.]

Re: Body Dolly Problems on C-1 Body

Guys, I sent an email to Gary and Eric about the Noland Adams Workbook and C-1 bodies not fitting on that dolly design. Thus far I have not received a reply. I see no reason why someone could not post a drawing of a dolly that would work for a C-1 body and support both front and rear. Perhaps one of our moderators could enlighten us about this issue.
Brooks Glover (2141)

[Gary C.]

Re: Body Dolly Problems on C-1 Body

Brooks, this is a modified drawing of what I posted earlier to include the nose and tail support that I described in the text. Gary....

[Roger W.]

Re: Body Dolly Problems on C-1 Body

Thank You for the plans. You saved many of us who were planning to build Nolans dolly much swearing.