I have read the JG and seen some earlier posts on underhood margins but it would be helpful if someone could post or send me pictures showing the correct c-2 hood margins for my 67. I assume they are the same for 63-67. Can send to carnold@coj.net
1963-1967 hood blackout margins
Collapse
X
-
Tags: None
- Top
-
Re: 1963-1967 hood blackout margins
Check the yellow and black hood photos on my website listed below. They are from an original paint 67 427 produced early in the year, 1967.
Clearly, there was a lot of slop in the placement of the mat (or paint screen?) around the inside of the hood.
Tom D.https://MichiganNCRS.org
Michigan Chapter
Tom Dingman- Top
-
Re: 1963-1967 hood blackout margins
Thanks Tom. I need pictures along the sides of the underhood down to the hinge area. Did I miss something at your site or are your pics just the top?- Top
Comment
-
Re: 1963-1967 hood blackout margins
Charles,
Here are a few pictures I took of a 66 or 67 that was parked behind mine at the NCRS Regional Meet in Orlando. This car was an original unrestored extremely low miles car which belongs to one of the main fellows involved with the NCRS. He had recently purchased the car and this was the first event he has taken it to. I took these photo's in order to duplicate my overspray as you are. I hope they help.
Cheers,
Craig
- Top
Comment
-
-
Re: 1963-1967 hood blackout margins
Charles,
Here are some hood blackout pictures of two different 1965 Duntov car taken at the 2008 NCRS National Convention. I have other pictures of a 1964 and 1967 that I will provide in a separate post.
Hope this helps.
Regards,
James West- Top
Comment
-
Re: 1963-1967 hood blackout margins
Charles,
Here are the pictures of the 1964 which are the first picture on the left and the 1967 which are the two pictures on the right.
James West- Top
Comment
-
Comment