early 56 corvettes in the works

[Michael A.]

Hi all,

I do not post very often, but thought I would just ask if there are currently any other members who are in the middle of doing an early under ser. # 400 1956 corvette. It would be nice to share ideas and findings. Never have enough information about the early cars. Hope this gets some response. Later Mike Anderson (317)729-2418

[Roy B.]

Re: early 56 corvettes in the works

I like early 56 , made like no other later 56 and which many 55 parts were carried over like the Radiator (5) piece shrouding, Heater assy, and one of a kind exshaust manifolds, Generator support ,plug wire brackets and so on.
Hope you connect with some one .

[John N.]

Re: early 56 corvettes in the works

Mike
Have you looked at the Mike Hunt research in the Restorer and Vette Vues.
Regards

[Mike M.]

Re: early 56 corvettes in the works

i have 566th 56 built. unrestored, unmolested 100K mile one owner before me. hollar if i can help. i won't get around to restoring for a couple more years. mike

[Richard M.]

Re: early 56 corvettes in the works

I just acquired '56 #1371, 371st carbuilt. Very bare, but at last I can show you what's underneath all the "stuff" easily. I am very interested in how yours is made up, being 29 cars away from mine.

I am planning a "mid-century" Super Sport replica, but need many of the original items as well.

Rich

[Gary C.]

Re: early 56 corvettes in the works

Michael, Bert Lukens (1901) just finished a '56 with VIN below 200. It was at the Bend Regional this fall. Bert's a Member of the TDB so if you have questions you can send him an e-mail. Also, Dave Ferguson is very familiar with the <210 VIN '56's. By the way does yours have riveted or dog bone welded wheels on it? Gary....

[Michael A.]

Re: early 56 corvettes in the works

Gary,
The wheels are not here at the house. They are in Ill. with the body getting painted. I believe they are welded but will have to check. Thanks Mike