67 BB radiator top plate holes

[Chuck B.]

My 67 BB copper radiator is missing the two holes inboard of the rectangular cutouts on the top plate. Can someone tell me the size of those holes and location in relation to the edge of the innermost rectangular cutout. Thanks

[Joel F.]

Re: 67 BB radiator top plate holes

I do not have the dimensions before me, but for 67, these holes should be in the same place on top and bottom of the radiator. Do you have holes on one side? On reproduction radiators, usually it is the top that has them and not the bottom.

[William L.]

Re: 67 BB radiator top plate holes

Charles
Hope this helps? Can't get to my car to mesure them.
Bill

[Kenneth B.]

Re: 67 BB radiator top plate holes

My 67 BB copper radiator is missing the two holes inboard of the rectangular cutouts on the top plate. Can someone tell me the size of those holes and location in relation to the edge of the innermost rectangular cutout. Thanks

My 2 67 BB/air Corvettes have no cut outs. Were air cars not the same or have mine been changed?
KEN

[Gary J.]

Re: 67 BB radiator top plate holes

My '66 BB A/C car has the cuts in the top plate of the radiator.

[Craig O.]

Re: 67 BB radiator top plate holes

Hope this helps. left out dimensions from Sm rectangle to center of hole - its 9/16"