If this is your first visit, be sure to check out the FAQ You must be an NCRS member before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below. If you have trouble logging in you can clear your cookies here!
I Found a original swich for my car but what I need is an original plug or pin plug. At some point some one cut of the original plug. Can some one tell me were I can find just the plug and not the hole harnes.
Thans,
Rob
I can find no indication that the connector you seek was ever available in SERVICE from GM as a separate part. Whether or not it was, though, it's not available now. So, I would say that your options are these:
1) Contact one of the harness manufacturers, especially M&H Electrical Fabricators, and see if they will sell you the connector separately, or;
2) Obtain a used example from a donor vehicle. The donor does not need to be a Corvette.
I can find no indication that the connector you seek was ever available in SERVICE from GM as a separate part. Whether or not it was, though, it's not available now. So, I would say that your options are these:
1) Contact one of the harness manufacturers, especially M&H Electrical Fabricators, and see if they will sell you the connector separately, or;
2) Obtain a used example from a donor vehicle. The donor does not need to be a Corvette.
Comment