Zerex G05 Coolant

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike M.
    Frequent User
    • December 20, 2013
    • 30

    #16
    Hey Joe,

    If you would, please let us know what you did to solve this situation. I had a slow leak on a water pump on my L36 and just replaced the pump. I have never been big on using gasket sealer but this may be a good time to consider using some.

    Comment

    • Duke W.
      Beyond Control Poster
      • January 1, 1993
      • 15489

      #17
      Originally posted by Joseph Santamaria (50893)
      Re: Zerex G05 Coolant

      Honestly no. It is possible I applied too much pressure on a cold system. I think the system s designed for a 15psi.
      Fifteen psi is the maximum operating pressure assuming a properly functioning 15 psi relief cap, but test pressure should be higher. A radiator shop that rebuilt a radiator for me about 15 years ago said they tested the job to 30 psi.

      For an on the car test I would limit pressure to not much more that 15 psi otherwise hoses could blow.

      Think in terms of a submarine. Say normal operating max depth is 900 feet, EWO might be 1200 and crush depth is 1500.

      Duke

      Last edited by Duke W.; January 5, 2025, 04:18 PM.

      Comment

      • Joseph S.
        Very Frequent User
        • October 28, 2014
        • 180

        #18
        Originally posted by Mike McFarland (59330)
        Hey Joe,

        If you would, please let us know what you did to solve this situation. I had a slow leak on a water pump on my L36 and just replaced the pump. I have never been big on using gasket sealer but this may be a good time to consider using some.
        Sure will Mike- still working it.

        Joe

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"