67 L36 with Power Steering and Factory AC - Replacing 2 hoses attached to reservoir

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David J.
    Infrequent User
    • October 1, 1990
    • 25

    67 L36 with Power Steering and Factory AC - Replacing 2 hoses attached to reservoir

    To replace the 2 power steering hoses attached to the reservoir/pump is it necessary to remove the reservoir, then the alternator bracket? if not, how do you reach the connectors attached to the reservoir?
    Thank you
  • Peter M.
    Very Frequent User
    • May 31, 2013
    • 358

    #2
    Re: 67 L36 with Power Steering and Factory AC - Replacing 2 hoses attached to reserv

    David,
    Since no one else has offered anything I will take a shot. I also have a 67 427 with AC and PS. It has been a while but as I recall you can change the hoses from under the car without removing anything.
    It won't be easy and you may need some special wrenches (Line wrenches and maybe crows foot wrenches.)
    Kind regards

    Comment

    • Gary J.
      Extremely Frequent Poster
      • April 1, 1980
      • 1225

      #3
      Re: 67 L36 with Power Steering and Factory AC - Replacing 2 hoses attached to reserv

      Will also need to suck as much fluid out as possible. Remember the lines will have fluid in them also.

      Comment

      • David J.
        Infrequent User
        • October 1, 1990
        • 25

        #4
        Re: 67 L36 with Power Steering and Factory AC - Replacing 2 hoses attached to reserv

        Thanks for the info Peter.

        Comment

        • David J.
          Infrequent User
          • October 1, 1990
          • 25

          #5
          Re: 67 L36 with Power Steering and Factory AC - Replacing 2 hoses attached to reserv

          Thanks Gary!

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"