Teak Wheel Finish

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Joseph C.
    Frequent User
    • March 13, 2007
    • 30
    #1

    Teak Wheel Finish

    What should be the finish on a teak wheel. Light clear varnish or oiled? Or for that matter something else. The car is a '65 coupe

    Joe
    Tags: None
      • Top
    • Jack M.
      Extremely Frequent Poster
      • March 1, 1991
      • 1076
      #2
      Re: Teak Wheel Finish

      According to an old Restorer article:
      "The final manufacturing steps were the cutting of the finger grooves and the sanding, smoothing and final finishing using, according to the Millers, at least three coats of a catalytic urethane filler and sealer resulting in a smooth finish. This was then topped off by a final coating of a urethane clear coat to insure durability and scratch resistance."
        • Top

        Comment

        • Joseph C.
          Frequent User
          • March 13, 2007
          • 30
          #3
          Re: Teak Wheel Finish

          Thank you Jack. Greatly appreciated

          Be well and stay safe

          Joe
            • Top

            Comment

            Previous template Next
            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"