69 L71 linkage question - NCRS Discussion Boards

69 L71 linkage question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Lawrence S.
    Very Frequent User
    • March 31, 1993
    • 770
    #1

    69 L71 linkage question

    Guys how snug should the clevis pin nut on the center carb be? I have tightened mine up to a nice snug position but seems to bind the linkage. Right now it seems to be too loose but works.
    Last edited by Lawrence S.; July 13, 2018, 09:04 PM.
    Tags: None
      • Top
    • John M.
      Expired
      • December 31, 1997
      • 813
      #2
        • Top

        Comment

        • Lawrence S.
          Very Frequent User
          • March 31, 1993
          • 770
          #3
          Re: 69 L71 linkage question

          Thanks John. Yea mine for sure has "slop". The nylon threaded nut does not have the end of the stud past the forward edge of the nut (if that makes sense).
            • Top

            Comment

            Previous template Next
            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"