Solid axle 2nd front stabilizer bar

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike E.
    Extremely Frequent Poster
    • March 1, 1975
    • 5104

    Solid axle 2nd front stabilizer bar

    Ever seen one of these? As per Corvette News Vol. 5:3. Can you identify all the parts? (There were two of each except for the bar--only one of each pictured.
    Attached Files
  • Jim L.
    Extremely Frequent Poster
    • October 1, 1979
    • 1778

    #2
    Re: Solid axle 2nd front stabilizer bar

    That's an ultra-rare piece, Mike. The Jerry Austin/Bob Bondurant '57 racer has one, though obviously added after ownership by these two drivers. It's the only C1 I've ever seen with the GM bar although I've seen other C1 racers which have had 2nd front bars of unknown heritage added.

    Jim
    Attached Files

    Comment

    • Dan H.
      Extremely Frequent Poster
      • August 1, 1977
      • 1361

      #3
      Re: Solid axle 2nd front stabilizer bar

      Mike, did Mike Pilsburys 60 racer have these or other parts. I remember him telling me he spotted the stabilizers in the Corvette junk yard he bought the 60 from.
      1964 Red FI Coupe, DUNTOV '09
      Drove the 64 over 5000 miles to three Regionals and the San Jose National, one dust storm and 40 lbs of bugs!

      Comment

      • Mike E.
        Extremely Frequent Poster
        • March 1, 1975
        • 5104

        #4
        Re: Solid axle 2nd front stabilizer bar

        His had this set-up, as I best recall.

        Comment

        • Ian G.
          Extremely Frequent Poster
          • September 4, 2007
          • 1114

          #5
          Re: Solid axle 2nd front stabilizer bar

          Hey Mike are you able to post a higher resolution photo of the flyer? I cannot read it and it looks very interesting

          Comment

          • Mickey S.
            Infrequent User
            • June 1, 1976
            • 5

            #6
            Re: Solid axle 2nd front stabilizer bar

            Jim, the first picture Mike Ernst shows of the article in Corvette News showing the second front stabilizer bar is the Corvette News issue I took to my local Chevrolet dealer in 1963 and had him order all the parts so I install them on the '57. The article listed all the part numbers and said Chevrolet had notified SCCA to make the parts retroactive for all solid axle Corvettes. By the way I still have that issue of Corvette News

            Comment

            • Darryl D.
              Very Frequent User
              • February 7, 2017
              • 386

              #7
              Re: Solid axle 2nd front stabilizer bar

              Does anyone make this aftermarket or repo today?
              Current Corvettes owned 1957 two top stealth 383 dual quads--1965 original low mileage 300 h.p. coupe.

              Other Corvettes owned over the years:
              1954. 1957 AIRBOX FI. Two 1958s one FI, One 2x4. 1961. 1964 convertible A/C auto trans. Two 1965s one coupe with 300 h.p. loaded A/C car, one 365 h.p. convertible Two 1966s one loaded A/C, BB coupe one loaded A/C, SB coupe. Two 1968s one BB convert, 1969 BB coupe. 1971. 1973. 1978 L-82. 1985, 1986 both 4+3s.

              Comment

              • Darryl D.
                Very Frequent User
                • February 7, 2017
                • 386

                #8
                Re: Solid axle 2nd front stabilizer bar

                Originally posted by Darryl Dayton (63266)
                Does anyone make this aftermarket or repo today?
                Can anyone answer the above question?
                Current Corvettes owned 1957 two top stealth 383 dual quads--1965 original low mileage 300 h.p. coupe.

                Other Corvettes owned over the years:
                1954. 1957 AIRBOX FI. Two 1958s one FI, One 2x4. 1961. 1964 convertible A/C auto trans. Two 1965s one coupe with 300 h.p. loaded A/C car, one 365 h.p. convertible Two 1966s one loaded A/C, BB coupe one loaded A/C, SB coupe. Two 1968s one BB convert, 1969 BB coupe. 1971. 1973. 1978 L-82. 1985, 1986 both 4+3s.

                Comment

                • Jim L.
                  Extremely Frequent Poster
                  • October 1, 1979
                  • 1778

                  #9
                  Re: Solid axle 2nd front stabilizer bar

                  Originally posted by Mickey Swezey (961)
                  Jim, the first picture Mike Ernst shows of the article in Corvette News showing the second front stabilizer bar is the Corvette News issue I took to my local Chevrolet dealer in 1963 and had him order all the parts so I install them on the '57. The article listed all the part numbers and said Chevrolet had notified SCCA to make the parts retroactive for all solid axle Corvettes. By the way I still have that issue of Corvette News
                  Why am I not surprised!!!!

                  Comment

                  • Jim L.
                    Extremely Frequent Poster
                    • October 1, 1979
                    • 1778

                    #10
                    Re: Solid axle 2nd front stabilizer bar

                    Originally posted by Darryl Dayton (63266)
                    Does anyone make this aftermarket or repo today?
                    It'd be a DIY project.

                    Comment

                    • David B.
                      Very Frequent User
                      • March 1, 1980
                      • 679

                      #11
                      Re: Solid axle 2nd front stabilizer bar

                      Mike,
                      I know this is an old thread but it appears no one has answered your question re: part #s. If you are still interested I stumbled upon print #3823052 which lists all parts required to assemble/build. Print was drawn 12-21-61. Will snail mail if you still need.

                      Comment

                      • James G.
                        Extremely Frequent Poster
                        • June 1, 1976
                        • 1556

                        #12
                        Re: Solid axle 2nd front stabilizer bar

                        Fred Yeakel's silver 57 also used the added bar. He bought and installed his in 1960. Bob Erickson in Seattle owns and vintage races the car today.
                        Attached Files
                        Over 80 Corvettes of fun ! Love Rochester Fuel Injection 57-65 cars. Love CORVETTE RACE CARS
                        Co-Founder REGISTRY OF CORVETTE RACE CARS.COM

                        Comment

                        • Darryl D.
                          Very Frequent User
                          • February 7, 2017
                          • 386

                          #13
                          Re: Solid axle 2nd front stabilizer bar

                          Originally posted by Jim Lockwood (2750)
                          It'd be a DIY project.
                          I am a little confused here, are the TWO anti roll bars on these cars??
                          Current Corvettes owned 1957 two top stealth 383 dual quads--1965 original low mileage 300 h.p. coupe.

                          Other Corvettes owned over the years:
                          1954. 1957 AIRBOX FI. Two 1958s one FI, One 2x4. 1961. 1964 convertible A/C auto trans. Two 1965s one coupe with 300 h.p. loaded A/C car, one 365 h.p. convertible Two 1966s one loaded A/C, BB coupe one loaded A/C, SB coupe. Two 1968s one BB convert, 1969 BB coupe. 1971. 1973. 1978 L-82. 1985, 1986 both 4+3s.

                          Comment

                          • Mike E.
                            Extremely Frequent Poster
                            • March 1, 1975
                            • 5104

                            #14
                            Re: Solid axle 2nd front stabilizer bar

                            Two fronts. The standard one on top of the frame and to the front of the lower a-arms. A second on the bottom of the frame, to the rear of the lower a-arms. As pictured in the attachec CN article.

                            Comment

                            • Darryl D.
                              Very Frequent User
                              • February 7, 2017
                              • 386

                              #15
                              Re: Solid axle 2nd front stabilizer bar

                              Originally posted by Mike Ernst (211)
                              Two fronts. The standard one on top of the frame and to the front of the lower a-arms. A second on the bottom of the frame, to the rear of the lower a-arms. As pictured in the attachec CN article.
                              So, any data on how it performed? Any REAL difference from just one?
                              Current Corvettes owned 1957 two top stealth 383 dual quads--1965 original low mileage 300 h.p. coupe.

                              Other Corvettes owned over the years:
                              1954. 1957 AIRBOX FI. Two 1958s one FI, One 2x4. 1961. 1964 convertible A/C auto trans. Two 1965s one coupe with 300 h.p. loaded A/C car, one 365 h.p. convertible Two 1966s one loaded A/C, BB coupe one loaded A/C, SB coupe. Two 1968s one BB convert, 1969 BB coupe. 1971. 1973. 1978 L-82. 1985, 1986 both 4+3s.

                              Comment

                              Working...
                              Searching...Please wait.
                              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                              Please push the back button and reload the previous window.'
                              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                              Please push the back button and reload the previous window.'
                              An internal error has occurred and the module cannot be displayed.
                              There are no results that meet this criteria.
                              Search Result for "|||"