1970 Corvette Brake Master Cylinder

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Daniel S.
    Very Frequent User
    • January 14, 2011
    • 307

    1970 Corvette Brake Master Cylinder

    Hi Gents,

    I'm looking for reference photos of an original 1970 Corvette brake master cylinder. Are there original/factory units dated or just have a part #? Do they have bleeders?

    Anyone have a good source to rebuild/restore a core back to factory original specifications? Unit will be for my '70 LT1 convert.

    Thanks,
    Dan
  • Jim T.
    Expired
    • March 1, 1993
    • 5351

    #2
    Re: 1970 Corvette Brake Master Cylinder

    My 1970's brake master cylinder does have bleeders. On the front of it there is a stamping of one letter, looks like a "G".

    Comment

    • Terry M.
      Beyond Control Poster
      • October 1, 1980
      • 15541

      #3
      Re: 1970 Corvette Brake Master Cylinder

      David
      Original 1970 (and 1968 to 1972 for that matter) master cylinders have a casting number on the inboard side, two steel (silver color plating) bleeder screws and most will have a Julian code date stamp on the forward brake line port machined surface. They will also have a two letter "broadcast code stamped on the front semi-circular machined surface. A good description of the finish as well as the casting numbers and broadcast code is in your version of the 1970-72 TIM&JG. There is some controversy over the casting number for the power brake master cylinder, but it involves the numbers 6 and 8 so if that is your situation read the number without too much concern for those two numbers.
      Terry

      Comment

      • Alan S.
        Extremely Frequent Poster
        • August 1, 1989
        • 3413

        #4
        Re: 1970 Corvette Brake Master Cylinder

        Hi Dan,
        Here are a couple of pictures from my 71 standard brakes master cylinder.
        They illustrate the the 2 stamps on the master cylinder and also one on the distribution block you might want to check for.
        Regards,
        Alan



        Here's the Julian date stamp. the surface it's on is a machined surface so is unpainted even
        though it looks painted in the picture. 0 336


        And a Julian date stamp on the distribution block. 0 259
        71 Coupe, 350/270, 4 speed
        Mason Dixon Chapter
        Chapter Top Flight October 2011

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43133

          #5
          Re: 1970 Corvette Brake Master Cylinder

          Originally posted by Jim Trekell (22375)
          My 1970's brake master cylinder does have bleeders. On the front of it there is a stamping of one letter, looks like a "G".

          Jim------


          If it's a power brake master cylinder the code should be "PG". So, the "P" may be very faint or, perhaps, it was somehow omitted.
          In Appreciation of John Hinckley

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"