If this is your first visit, be sure to check out the FAQ You must be an NCRS member before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below. If you have trouble logging in you can clear your cookies here!
The 66 427 project i'm working on has a cracked rear end housing. My questions are.
1; is professional welding a good repair option? 2; a possible supplier that may have a used 66 427 3;08 housing,
Last edited by Jef S.; October 19, 2015, 08:28 PM.
Reason: typo
The 66 427 project i'm working on has a cracked rear end housing. My questions are.
1; is helicoil welding a good repair option? 2; a possible supplier that may have a used 66 427 3;08 housing,
Jef------
Are you referring to the housing or the cover? The cover often cracks (usually due to improper installation of the spring) but I've not heard of a problem with housings cracking. In any event, I would not recommend trying to repair either a housing or a cover.
A good source for used housings and covers is Ikerd's Corvette of Bedford, IN.
1966 cracked rear end housing
Comment