58 Heads

[Domenic T.]

Re: 58 Heads

As I remember the only staggered valve cover bolts were 1955 to 1957. 1958 on used the bolts directly across from each other.

Dom

[Thomas H.]

Re: 58 Heads

As I remember the only staggered valve cover bolts were 1955 to 1957. 1958 on used the bolts directly across from each other.

Dom

staggered were also used in 58 and early 59 before the switch over to the different head casting.

[Joe L.]

Re: 58 Heads

OOOps... John, I checked the no. again and it is the single digit K127 not the K1257 and the end symbol's are very smooth. Correct? Thank you.

Brad-------


In this case, I cannot understand why the heads received such a deduction as you described.

[Steven B.]

Re: 58 Heads

What was noted as the reason for the deduction?Steve

[Brad H.]

Re: 58 Heads

Naturally they went by the book without really knowing. They saw the mountain looking end symbol as for the 58 and the triangle for the later year's, not asking about the nos. They said head's were probably Pass. car. 7/10 of point could throw a guy into second flight pretty easy if score were close. Did not happen here though. Looking for an original pan (58) or one that will pass judging also. Thank you. Brad.

[John H.]

Re: 58 Heads

OOOps... John, I checked the no. again and it is the single digit K127 not the K1257 and the end symbol's are very smooth. Correct? Thank you.

Brad -

Yes, that's correct - what was the nature of the deduction?